Frameless Glass Shower with Gray Porcelain in Natomas
About This Project
This shower in a Natomas new build was tiled to match the frameless sliding glass door system that the homeowner had already selected. With frameless glass, every tile surface is fully visible — there's no frame to hide an uneven tile edge or a grout joint that wandered slightly. The wall tile needed to be plumb and level to within 1/16 inch so the glass panels would sit flush against the tile surface along their full height.
Gray cloud-pattern porcelain on the walls is set in a large-format horizontal stack, with the grout joints aligned vertically across all three walls. The hexagon mosaic floor provides texture and slip resistance at the shower base. The pre-sloped shower floor was built with a mortar bed rather than a foam pan to give us more control over the exact slope to the linear drain position.
What We Did
- Verified stud plumb and shimmed framing where needed for frameless glass clearance
- Applied sheet waterproofing membrane to all walls and built mortar-bed shower floor
- Set large-format gray porcelain in horizontal stack with leveling clips throughout
- Set hexagon mosaic floor sloped to linear drain, grouted walls and floor separately

