Calacatta Marble-Look Shower Build in Del Paso
About This Project
This walk-in shower in a Del Paso home was built from scratch — the old tub-shower combo was removed and the space was opened up into a dedicated walk-in shower with three tiled walls and a tiled niche. Large-format Calacatta marble-look porcelain covers the walls in a horizontal stack pattern, with a white hexagon mosaic floor that contrasts cleanly against the large wall tiles.
The key prep step was the waterproofing system — we used a sheet membrane on all walls and a fully bonded waterproof pan liner on the shower floor, sloped at 1/4 inch per foot toward the center drain. The wall tile required leveling clips throughout because of the tile's size; without them, the variation in the porcelain's back surface would create lippage visible in the sidelight from the window nearby. The niche was tiled with the same wall tile, mitered at the corners for a clean look.
What We Did
- Demo of old tub-shower combo, substrate inspection and framing adjustment
- Cement board installation and sheet waterproofing membrane on all walls and floor
- Large-format wall tile set with leveling clips, niche tiled with mitered corners
- Hexagon mosaic floor set with center drain alignment, grout, and sealer